NEMO SOLAR DC SUBMERSIBLE WELL PUMPS

FLOJET 4300 SURFACE PUMP
HOME
PUMP SELECTION GUIDE
NEMO MODEL V2 SPECIFICATIONS
NEMO PUMP SYSTEMS GUIDE
NEMO PUMP FLOW/AMP/WIRE CHART
NEMO PUMP INSTALLATION
NEMO USE GUIDE
NEMO PUMP WARRANTY
HOW TO ORDER
NEMO QUESTIONS?
FLOAT SWITCH
LOW VOLTAGE DISCONNECT
FLOJET 4300 SURFACE PUMP
CHARGE CONTROLLER
FLEXCHARGE TIMER
RELAY & SOCKET
RELATED LINKS
SOLAR MODULES?
ABOUT NEMO COMPANY
DEALER DISCOUNT

Flojet4300.jpg
CLICK TO ENLARGE

A Flojet 4300 pump, installed between a non-pressurized storage tank and a standard pressure tank, can be used as a booster pump to obtain standard household water system pressure.

The Flojet 4300 surface pump can also be used directly in many applications where a submersible pump is not required, such as pumping from a stream, pond, or shallow well if the vertical distance to the water below the pump is not more than about 15 feet (it will pump water about 100 vertical feet above the pump and hundreds of feet horizontally).

The Flojet 4300 Quad Pump can automatically provide a maximum 45 psi water pressure to a pressure tank, holding tank, or directly to a faucet, with a flow rate of up to 4.9 gallons per minute. This Flojet 4300 is the Heavy Duty model, an industrial series 12 Volt DC quad demand pump with a built in pressure switch. It is rated at 13 amps, but at 4.9 GPM that still translates into outstanding efficiency. It comes complete with snap-in 3/4" hose barbs for easy installation.

FLOJET 4300 12VDC PUMP:
$150 POSTPAID TO USA.
$170 POSTPAID TO CANADA.
$190 POSTPAID TO OTHER COUNTRIES WORLDWIDE.

CHOOSE DESTINATION

ALSO, THE FLOJET 4300 PUMP IS NOW AVAILABLE IN A 24 VOLT MODEL:

FLOJET 4300 24VDC PUMP:
$150 POSTPAID TO USA. 
$170 POSTPAID TO CANADA.
$190 POSTPAID TO OTHER COUNTRIES WORLDWIDE.
 

Choose Destination:

========================================================================================================